Echo SRM-210 Brush Cutter User Manual


 
18
STARTING WARM ENGINE
The starting procedure is the same as Cold Start except DO NOT close
the choke, and do not depress throttle trigger to wide open position.
WARNING DANGER
The cutting attachment should not move at idle. If attachment
moves, readjust carburetor according to "Carburetor Adjustment"
instructions in this manual or see your ECHO Dealer, otherwise
serious personal injury may result.
1. Stop Switch
Move stop switch button (A) forward away from the STOP position.
2. Primer
Pump primer bulb (C) until fuel is visible and flows freely in the clear
fuel tank return line. Pump bulb an additional 4 or 5 times.
3. Recoil Starter
Lay the unit on a flat, clear area and pull the recoil starter handle (D)
until the engine fires.
NOTE
If engine does not start after 5 engine engagements, use Cold Start
Procedure.
D
A
C