Filter
Top Products
PAS ARTICULATING HEDGE CLIPPER ATTACHMENT
OPERATOR'S MANUAL
7
DESCRIPTION
The ECHO product you have purchased has been factory pre-assembled for your convenience.
After opening the carton, check for damage. Immediately notify your retailer or ECHO Dealer of damaged or missing
parts. Use the contents list to check for missing parts.
CONTENTS LIST
_____ 1 - Articulating Hedge Clipper Attachment
_____ 1 - Operator's Manual
_____ 1 - Hedge Clipper Safety Manual
_____ 1 - Warranty Registration Card
_____ 1 - 8 x 10 mm Wrench
_____ 1 - 4 mm Hex Wrench
_____ 1 - Blade Cover
1
4
5
1. GEAR TENSION RELEASE LEVER - Moving lever up releases tension on gears to permit adjustment of blade
cutting angle when indexing lever is pressed. The gear tension release lever
MUST be placed in the down position
to remove internal gear play before operating the hedge clipper. The gear tension lever
DOES NOT secure gear box
angle setting.
2. LOWER DRIVE SHAFT ASSEMBLY - Includes the Gear Housing assembly, Flexible Drive Cable, Blade and Safety
Decals.
3. FLEXIBLE DRIVE CABLE - Cable end fits into upper drive shaft coupler. Lubricate drive cable every 25 hours with
ECHO
®
LUBE
TM
grease.
4. BLADE ANGLE INDEXING LEVER - Spring loaded lever that engages with a notch every 15 degrees to secure
cutting angle adjustment. Press lever to disengage from notch, release after new position is selected.
5. GEAR HOUSING HANDLE - Provides secure handgrip for adjusting cutting blade angle.
6. GREASE FITTINGS - Grease gear case every 15-20 hours of operation or on a weekly schedule.
7. CUTTING BLADES - Double reciprocating blades mounted to a blade support bar. Double sided blades, are capable
of cutting on either side of the blade.
8. BLADE COVER - Used to cover blades during transport and storage. Remove blade cover before operating unit.
9. HEDGE CLIPPER SAFETY VIDEO - (Not included with unit) P/N 99922202800 English version and P/N 99922203513
Spanish version are available at a cost of $5.00 from ECHO, INC. or any authorized ECHO dealer. The video over-
views safety precautions and proper operating techniques and is supplemental to the Safety Manual. Read and
understand the Safety Manual for complete information on safe operation.
6
3
2
8
9
7