Filter
Top Products
PAS ARTICULATING HEDGE CLIPPER ATTACHMENT
OPERATOR'S MANUAL
3
Throughout this manual and on the product itself, you will find safety
alerts and helpful, information messages preceded by symbols or key
words. The following is an explanation of those symbols and key words
and what they mean to you.
This symbol accompanied by the words WARNING and
DANGER calls attention to an act or condition that can
lead to serious personal injury to operator and bystand-
ers.
The circle with the slash symbol means whatever is
shown within the circle is prohibited.
IMPORTANT
NOTE
MANUAL S AFETY S YMBOLS AND I MPORTANT INFORMATION
IMPORTANT The enclosed message
provides information necessary for the
protection of the unit.
NOTE This enclosed message provides
tips for use, care and maintenance of the
unit.
SAFETY
DECALS
Locate these safety decals on your unit. The complete unit illustration found in the "DESCRIPTION" section, will help
you locate them. Make sure the decals are legible and that you understand and follow the instructions on them. If a decal
cannot be read, a new one can be ordered from your ECHO Dealer. See PARTS ORDERING instructions for specific
information.
Shaft Decal
WARNING DANGER
This unit is not designed to insulate against hazards associated with the contact of wires
carrying electrical current.
To avoid possible injury/death due to electrical shock or other hazards. DO NOT operate unit if
any wires (power, telephone, cable, etc.) are closer than 15 feet (4/5 meters minimum distance,
to any part of the unit or operator.
WARNING DANGER
This unit can be dangerous if used improperly. • Falling objects and/or blade
contact can cause serious injury to operator, helpers and bystanders. • Keep helpers
and bystanders at least 50 feet (15m) clear of operating area. • To reduce injury risk,
READ AND UNDERSTAND the operator's Manual, replacement copies are available
through your ECHO dealer. • Wear Protective clothing (head, hearing and eye
protection meeting ANSI standards) specified in the Operator's Manual. • STOP
engine before making repairs or blade adjustments. • ALWAYS use adjustment handle
when adjusting blade angle. • Keep hand away from blade.
P/N 89016012360