Filter
Top Products
24
A
b l a d e a d j u s t m e n t
Level 2.
Tools Required: 8 mm Socket & Extension, 4mm Hex Wrench w/
extension
1. Move stop switch to STOP position.
2. Disconnect spark plug wire.
WARNING
Hedge clipper blades are very sharp. Touching them may lead to
severe personal injury. Use long hex wrenches and sockets with
extensions when tightening blade screws and blade locknuts to keep
hands at a safe distance from sharp blades.
3. Tighten blade screws (A) securely.
4. Hold blade screws (A) to prevent turning, and tighten locknuts (B).
B