Filter
Top Products
He d g e Cl i p p e r
Op e r a t O r 's Ma n u a l
19
1. Remove spark plug lead.
2. Remove mufer cover (2 screws).
3. Remove starter cover (7 screws).
4. Use brush to remove dirt from cylinder ns.
IMPORTANT
DO NOT use a metal scraper to remove dirt from the cylinder ns.
5. Assemble components in reverse order.
e x h a u s t s y s t e m
Spark Arrestor Screen
Level 2.
Tools required: 3 mm Hex wrench, Cross Head Screwdriver, Soft
metal brush
Parts required: Screen, Gasket
1. Remove spark plug lead from spark plug, and remove engine or
mufer cover. (2 screws)
2. Place piston at Top Dead Center (TDC) to prevent carbon/dirt from
entering cylinder.
3. Remove exhaust guide (A), gasket (B), and screen (C) from mufer
body. (5 screws)
4. Clean carbon deposits from mufer components.
NOTE
When cleaning carbon deposits, be careful not to damage the cata-
lytic element inside mufer.
5. Replace screen if it is cracked, plugged or has holes burned through.
6. Install engine cover or mufer cover and attach spark plug lead.
A
B
C