Filter
Top Products
22
1. Move stop switch to stop position.
2. Disconnect spark plug wire from spark plug.
3. Brush loose debris from blade and coat both sides of blade with the
50-50 cleaning mixture.
4. Allow cleaning mixture to soften the remaining gummy residue then
wipe it from the blade.
5. Apply clean oil to the entire length of the blade. Be certain the
blade bolts are lubricated.
6. Wipe excess oil from the blade before putting the unit back in ser-
vice.
Gear Box Assembly
Level 1.
Tools required: Grease Gun , Clean rag
Parts required: POWER BLENDX
TM
14oz. (P/N 91015) or Lithium
Based Grease.
1. Clean dirt from the grease tting (A).
2. Carefully pump grease into tting (A). DO NOT force grease. Too
much pressure will force grease past seals and cause damage. Apply
1-2 pumps of grease every 15-25 hours of operation.
3. Wipe excess grease from around grease tting.
A