Filter
Top Products
HEDGE CLIPPER
OPERATOR'S MANUAL
9
SPECIFICATIONS
MODEL ----------------------------------------------------- SHC-210
Length ------------------------------------------------------- 1790 mm (70.5 in.)
Width--------------------------------------------------------250 mm (9.84 in.)
Height -------------------------------------------------------270 mm (10.6 in.)
Weight (dry) ------------------------------------------------ 5.87 kg (12.9 lb.)
Engine Type ------------------------------------------------ Air cooled, two-stroke, single cylinder gasoline engine
Bore ---------------------------------------------------------- 32.2 mm (1.27 in.)
Stroke-------------------------------------------------------- 26.0 mm (1.02in.)
Displacement ----------------------------------------------- 21.2 cc (1.29 cu. in.)
Exhaust ------------------------------------------------------Spark Arrestor Muffler
Carburetor -------------------------------------------------- Zama RB Diaphragm w/Purge Pump
Ignition System -------------------------------------------- Flywheel Magneto, CDI (capacitor discharge ignition) with ESG
Spark Plug -------------------------------------------------- NGK BPMR-8Y (Gap 0.65 mm (0.026 in.)
Fuel ---------------------------------------------------------- Mixed (Gasoline and Two-stroke Oil)
Fuel/Oil Ratio ----------------------------------------------- 50:1 two-stroke air cooled engine oil
Gasoline ----------------------------------------------------- 89 Octane unleaded. DO NOT use fuel containing methyl alcohol,
more than 10% ethyl alcohol or 15% MTBE.
Oil ------------------------------------------------------------ Power Blend
TM
Premium Universal 2-Stroke Oil
Fuel Tank Capacity ----------------------------------------0.45 lit. (15.2 US fl. oz.)
Recoil Starter System -------------------------------------- Automatic Recoil Starter
Clutch ------------------------------------------------------- Centrifugal Type
Gear Case Ratio -------------------------------------------- 5.88:1
Cutter -------------------------------------------------------- Double Reciprocating Blade - Double Edge
Length ----------------------------------------------------- 490 mm (19.3 in.)
Pitch -------------------------------------------------------35 mm (1.4 in.)
Idle Speed --------------------------------------------------- 2,400 - 3,200 RPM
Wide Open Throttle Speed -------------------------------10,000 - 12,000 RPM
IMPORTANT This spark ignition system complies with Canadian ICES-002