Echo CS-4400 Chainsaw User Manual


 
25
CS - 4400 TYPE1-E
Dimension L x W x H mm 398 x252x 272 (15.7 in x 9.9 in x 10.7 in )
Masses Power head, dry kg 4.6 (10.2 lb)
Without chain and guide bar
Engine Type Air-cooled two-stroke single cylinder
Displacement mL (cm³) 43.6 (2.66 cu in)
Carburettor Diaphragm type
Magneto Flywheel magneto : CDI system
Spark plug CHAMPION CJ-6Y or NGK BPM 8Y
Starter Recoil starter
Power transmission Automatic centrifugal clutch
Fuel Mixture ratio 50 : 1 ratio with ECHO brand two-stroke oil.
89 octane unleaded. Do not use fuel containing
methyl alcohol, more than 10% ethyl alcohol or 15%
MTBE.
Tank capacity L 0.60 (20.3 US fl oz)
Oil Bar and chain ECHO bar and chain oil (or motor oil)
Tank capacity L 0.28 (9.5 US fl oz)
Guide bar and See page 22 for Chain and Guide BarCombination
saw chain Lubrication Adjustable automatic oil pump
Standard Front hand guard, Rear hand guard
features Anti-vibration, Spiked bumper
Throttle control lockout, Chain brake
Chain catcher, Spark arrestor muffler
STORAGE AFTER USE
* Technical data subject to change without notice.
TECHNICAL DATA
Inspect and adjust every part of the chain saw.
- Completely clean every part and repair if
necessary.
- Apply thin coating of oil on metal parts to
prevent rust.
Remove chain and guide bar, apply sufficient oil
coating and wrap them up in plastic sheet.
Drain fuel tank, pull starter slowly a few times to
drain fuel from carburettor.
Pour a small amount of clean motor oil into spark
plug hole, pull starter and crank the engine until
the TOP DEAD CENTER.
Store in a dry area, free from dust.
WARNING DANGER
DO NOT STORE IN ENCLOSURE WHERE
FUEL FUMES MAY ACCUMULATE OR REACH
AN OPEN FLAME OR SPARK.
NOTE
For future reference, you should keep this
instruction manual.
CAUTION
Do not lend and rent your chain saw without the
Instruction manual, Safety manual and Kick-
guard instruction.