Dolmar MS-250.4 Brush Cutter User Manual


 
24
CALIFORNIA EMISSION CONTROL WARRANTY STATEMENT
YOUR WARRANTY RIGHTS AND OBLIGATIONS
The California Air Resources Board and Makita U.S.A., Inc. are pleased to explain the emission control system warranty
on your 2000 and later Small Off-Road engine (herein “engine”). In California, the engine must be designed, built and
equipped to meet the State's stringent anti-smog standards Makita U.S.A., Inc. must warrant the emission control system
on your engine for the periods of time described below, provided there has been no abuse, neglect or improper
maintenance of your engine. Your emission control system includes parts such as the carburetor and the ignition system.
Also included may be hoses, connectors and other emission-related assemblies. Where a warrantable condition exists,
Makita U.S.A., Inc. will repair your engine at no cost to you including diagnosis, parts and labor.
MANUFACTURER'S WARRANTY COVERAGE:
The 2000 and later engines are warranted for two (2) years. If any emission-related part on your engine is
defective, the part will be repaired or replaced by Makita U.S.A., Inc.
OWNER'S WARRANTY RESPONSIBILITIES:
- As the engine owner, you are responsible for the performance of the required maintenance listed in your Owner's
Manual. Makita U.S.A., Inc. recommends that you retain all receipts covering maintenance on your engine, but
Makita U.S.A., Inc. cannot deny warranty solely for the lack of receipts or for your failure to ensure the
performance of all scheduled maintenance.
- As the engine owner, your should however be aware that Makita U.S.A., Inc. may deny you warranty coverage if
your engine or a part has failed due to abuse, neglect, improper maintenance or unapproved modifications.
- You are responsible for presenting your engine manufactured by Makita U.S.A., Inc. to a dealer, distributor or
warranty station authorized by Makita Factory Service Center which is the U.S. importer and/or OEM of the
Small Off-Road/engine as soon as a problem exists. The warranty repairs should be completed in a reasonable
amount of time, not to exceed 30 days.
If you have any questions regarding your warranty rights and responsibilities, you should contact Makita Factory
Service Center nearest you.
Makita Factory Service Center
Address Phone NO.
14930 Northam Street
La Mirada, CA 90638-5753
(714) 522-8088
41850 Christy Street
Fremont, CA 94538-5107
(510) 657-9881
1421N. Clovis Ave., Ste. 112
Fresno, CA 93727
(209) 252-5166
4554 Roseville Rd., Ste E
North Highlands, CA 95660
(916) 331-6211
392 S. Arrowhead Ave., #A-1
San Bernardino, CA 92408
(909) 885-1289
7674 Clairemont Mesa Blvd.
San Diego, CA 92111
(619) 278-4471
333 Littlefield Ave.
S.San Francisco, CA 64080
(415) 875-1002
1714 E McFadden Ave., Unit M
Santa Ana, CA 92705
(714) 667-5066
16735 Saticoy St., Ste. 105
Van Nuys, CA 91406
(818) 782-2440