30
CARE AND MAINTENANCE
LEVELING THE DECK
A. Set the tire pressure on all four tires.
B. Move the tractor to a hard, level surface (i.e. concrete or blacktop).
Place a 2x4 board under all four corners of the deck shell, just inside
of the anti-scalping wheels. Lower the deck down onto the boards.
The deck must rest on the boards, not the anti-scalping sheels.
Adjust the deck hangers longer or shorter until the deck "just"
comes off of the boards. Remove the boards and verify that the
deck is hanging on all four deck hangers, re-adjust if necessary. Lock the
jam nuts on the deck hangers. (Note: the two rear deck hangers will be
easier to adjust in the fender skirts are removed).
2 x 4 board, one each corner, just
inside of anti-scalping wheel
Front Deck
Hanger
(one each
side)
Rear Deck Hanger
(one each side)
new instructions & graphics.