Filter
Top Products
20
OPERATION INSTRUCTIONS
STARTING INSTRUCTIONS: Engine has been operated.
1. Move throttle control lever to 1/4 to 1/2 setting.
2. Insert ignition key and turn to "Start" position. When engine
starts, release ignition key. Key will return to "Run" position.
3. Move throttle control lever to wide open or maximum setting for
actual operation of the mower deck.
NOTE: Model ZTR 8000 Series may require partial choke setting
to start even if the engine has been operated for a
period of time.
4. Engine must be operated at wide open or maximum setting to
insure adequate lubrication, cooling and cut quality of the
mower deck.
DO NOT operate the engine in an enclosed area
due to the harmful exhaust gas produced.
NOTE: On initial operation, set throttle at slow speed.
Engine cannot be restarted when blade is engaged.
Safety switches stop engine when operator leaves seat
while mower blade is engaged.
Always turn engine off when leaving mower.
CAUTION