Filter
Top Products
11
Specifications go here
CHASSIS: 11 GA - rectangular tube
BODY: Folded sheet metal.
SEAT: Designed for operator comfort with padded back and arm rests. Seat is adjustable
fore and aft.
MOWER DECK: 2 Decks are available. Both decks are made of 10 GA fabricated welded
construction with 7 -" GA reinforcement plate. 3 blades combine for either a 60"
or 72" cut width. Cut height approximately 1.5" to 6" via 11 position lift handle.
BLADE DRIVE: Electric clutch
DRIVE SYSTEM: Each rear wheel is independently driven by a HydroGear BDA pump and White
CE wheel motor.
ENGINE: 25HP Kohler Command, 4-Cycle, V-Configuration, Overhead Valve, Air-
Cooled, Gasoline, Vertical Shaft, Aluminum Head, and Crankcase with Cast Iron
Liners, Full Pressure Lubrication/Full Flow Filter, Pulse-type Fuel Pump, Fixed
Jet Carburetor w/Smart-Choke, Electronic Ignition, In-Line Fuel Filter, Dual
Element Air Cleaner.
STARTING SYSTEM: Electric by key switch operation with safety interlocks on parking brake and blade
drive clutch.
TIRES: Front 13-6.5x6
Rear 23-10.5x12
RECOMMENDED Front 12 lbs.
TIRE PRESSURE: Rear 12 lbs.
CAPACITIES: Fuel - 11.5 gallons (approx)
Hydrostat oil tank - 4 quart with in-line 40 micron filter
Hydrostat oil recommendation, refer to page 36
Engine - 2 qts. SAE 10W30 (with filter)
DIMENSIONS: Width 73.5"(60" Deck), 85.5"(72" Deck)
Height 54"
Length 87"
Weight 1020 lbs.(60" Deck), 1054 lbs.(72" Deck)
NOTE: Additional information provided in service instructions under the individual
component.
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
SPECIFICATIONS
8000 Series