Filter
Top Products
Page 20
STARTING INSTRUCTIONS: Engine has been operated.
1. Move throttle control lever to 1/4 to 1/2 setting.
2. Insert ignition key and turn to "Start" position. When engine starts,
release ignition key. Key will return to "Run" position.
3. Move throttle control lever to
wide open or maximum
setting for actual
operation of the mower deck.
NOTE: Model ZTR 7000 Series may require partial choke setting to start
even if the engine has been operated for a period of time.
4. Engine must be operated at
wide open or maximum
setting to insure
adequate lubrication, cooling and cut quality of the mower deck.
DO NOT operate the engine in an enclosed area due to the
harmful exhaust gas produced.
NOTE: On initial operation, set throttle at slow speed.
Engine cannot be restarted when blade is engaged.
Safety switches stop engine when operator leaves seat while
mower blade is engaged.
Always turn engine off when leaving mower.
OPERATION INSTRUCTIONS
CAUTION