Filter
Top Products
TROUBLESHOOTING
MOWER CUT QUALITY:
There are many variables that can effect the cut quality of any riding mower. Type and conditions
of grass, cut height setting, engine RPM and ground speed are some of the variables that interact
creating differences in cut quality. Examination of one or more of t he above will generally
produce a quality cut.
The Troubleshooting Chart suggests practices and adjustments that may be helpful in improving
cut quality. Your Dixon ZTR dealer is also available to provide assistance to you.
Poor cut quality
Un-level mower deck
Consult your dealer
Poor cut quality
Uneven tire pressures
Check and adjust as required per
operators manual
SITUATION
CAUSES
REMEDY
Poor
cut quality
Ground speed
Reduce mowing speed
Poor cut quality
Incorrect engine to
mower deck belt
Refer to page 42 for part numbers
Poor cut quality
Engine RPM too low
Increase engine RPM to maximum
Poor cut quality
Dull or bent blade
Sh
arpen or replace as required
Poor cut quality
Grass buildup under
mower deck
Clean out underside of mower deck
Poor cut quality
Improper blades
Replace with original equipment
blade designed for the 5000 Series
Models