Filter
Top Products
CONTROLS
The parking brake used on the 5000 Series Models is designed to hold
the mower from moving and is noHntended for use in stopping the
mower while it is in motion.
CAUTION
Engage parking brake before starting engine.
Do not leave engine running fo r extended periods of time without the
parking brake engaged. Damage to the drive system could result.
TO SET PARKING BRAKE:
The hand operated parking brake is located at left hand side of mower.
To engage brake, pull lever up and to the rear. To release brake, move
lever forward and down.
NOTE:
Always set parking brake before
dismounting. Release parking brake before moving mower.
HYDRO-GEAR DRIVE SYSTEM:
Allows the mower to turn on its own axis (zero turning radius).
Drive levers control braking, turning, travel speed and direction. Each lever controls one
side of the mower.
NOTE:
The pressure required to operate the mower is very light.
A minimum of 1/2 hour should be spent simply driving the mower without
the blade drive engaged.
PARKING BRAKE:
Page 12