Filter
Top Products
TROUBLESHOOTING
MOWER CUT QUALITY:
There are many variables that can effect the cut quality of any riding mower. Type and
conditions of grass, cut height setting, engine RPM and ground speed are some of the
variables
that interact creating differences in cut quality. Examination of one or more of the
above will
generally produce a quality cut.
The Troubleshooting Chart suggests practices and adjustments that may be helpful in
improving
cut quality. Your Dixon ZTR dealer is also available to provide assistance to you.
Poor cut quality Incorrect engine to Refer to pages 23
mower deck belt
Poor cut quality Engine RPM too low Increase engine RPM to maximum
Poor cut quality Dull or bent blade Sharpen or replace as required
Poor cut quality Un-level mower deck Refer to page 24
Poor cut quality Grass buildup under Clean out underside of mower deck
mower deck
Poor cut quality Improper blades Replace with original equipment
blade designed for the 4000 Series
Models
Poor cut quality Uneven tire pressures Check and adjust as required per
operators manual
SITUATION
REMEDY
CAUSES
Reduce mowing speed
Poor cut quality
Ground speed
Page 32