Filter
Top Products
CARE AND MAINTENANCE
A CAUTION
HOT oil may cause burns. Allow engine to cool before
draining oil.
CHANGING THE ENGINE OIL:
1. The "snap lock" oil drain valve is located
on
the left side of the engine crankcase
on the
4423, and the right side of the
4424.
2. Place a suitable container under the drain
valve. The fitting of a short piece of hose to
the valve will help direct the
oil.
3. Push the valve body in and twist to clear
the
detent notch.
4. Puffing the valve body outward will start
the
flow of oil.
NOTE: Refer to engine manufacturers
recommendations for frequency of oil
changes.
OIL FILTERS:
• Oil changes on Models ZTR 4423 and ZTR 4424 require replacement of the oil
filters.
• These filters can be obtained from your authorized engine dealer.
• The use of any other oil filter may cause damage to the engine.
Model ZTR 4423 Model ZTR 4424
Briggs & Stratton Oil Filter: Kohler Oil Filter:
P/N 492 932 P/N 52 050 02
PLEASE DISPOSE OF USED OILS A T PROPER COLLECTION CENTERS.
PROTECT YOUR ENVIRONMENT
Page 27