Filter
Top Products
BLADE DRIVE SWITCH TEST:
a) Put parking brake in ON position.
b ) Swing out control levers.
c) Engage blade drive switch.
d ) Turn ignition switch to START.
Engine should not turn over or attempt to start.
SEAT SWITCH TEST:
a) In a SAFE AREA away from bystanders,
start the engine.
b ) Leave levers swung out and parking
brake OFF.
c) Engage blade drive.
d ) Raise slightly off seat.
ENGINE SHOULD STOP!
NOTE: If Any Safety Check FAILS, Do Not
Operate The Mower until the system
has been checked and repaired by an
Authorized Dixon Dealer.
21
TESTING OF SAFETY INTERLOCK
SYSTEMS:
OPERATION INSTRUCTIONS