Filter
Top Products
PARKING BRAKE:
The parking brake is designed to hold the
mower from moving and is not intended for use
in stopping the mower while it is in motion. The
engine will stop if the parking brake is engaged
while the control levers are in the drive position.
Engage parking brake
before starting engine.
TO SET PARKING BRAKE:
The hand operated parking brake is located on
the left side of the front panel.
To engage brake, pull lever up.
To release brake, move lever down.
NOTE: Always set parking brake before dismounting.
Release parking brake before moving mower.
TRANSMISSION DRIVE SYSTEM
Allows the mower to turn on its own axis “ZERO TURNING
RADIUS”. Each lever controls one side of the mower.
NOTE: The pressure required to operate the mower is very light.
17
CAUTION
CONTROLS