Dixon SPEEDZTR Lawn Mower User Manual


 
Speedztr 42 & Speedztr 36
Chassis: 11 gauge steel welded frame assembly
Body: All body parts made of high density polyethylene. Dent and
corrosion resistant.
Mower Deck: 36” Deck: 11 GA fabricated construction-36” cut width
42” Deck: 13 GA stamped steel construction-42” cut width
Blade Drive: Electric clutch.
Transmission: Each rear wheel is independently driven by a Hydro Gear
EZT hydrostatic drive.
Engine:
Speedztr 42: 15.5 HP Briggs & Stratton Intek, single cylinder, overhead
valve, air cooled, gasoline, vertical shaft with cast iron
cylinder, pressure lube with spin-on filter.
Speedztr 36: 14.5 HP Briggs & Stratton Intek, single cylinder, overhead
valve, air cooled, gasoline, vertical shaft with cast iron
cylinder, pressure lube with spin-on filter.
Starting System: Electric-key switch operation w/safety interlock blade drive.
Tires: Front - 11 x 4.00-5 ribbed tread (16-21 PSI)
Rear (42)-18 x 8.50 x 8 - 4 ply turf tread (8-14 PSI)
Rear (36)-18 x 6.50 x 8 - 4 ply turf tread (8-14 PSI)
Capacities: Fuel 3 gallons
Engine Oil 1.5 quarts
Dimensions: Width 40” maximum track width
Height 40” to top edge of seat
Length 72” hitch tab to front bumper
Weight 475 lbs
Additional information provided in service instructions under the individual component.
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.
14
SPECIFICATIONS