Filter
Top Products
MAINTENANCE
Dixon-35
WARNING!
Before performing any service or adjustment checklist
• Engage the parking brake.
• Place the Blade-switch in the disengaged position.
• Turn the ignition switch to “OFF” position and remove the key.
• Make sure the blades and all moving parts have completely stopped.
• Disconnect the spark plug wire from all spark plugs and place the wire where it
cannot come in contact with the plug.
1)
First change after 5-8 hours. When operating with a heavy load or at high ambient temperatures, replace every 50 hours.
2)
In dusty
conditions, cleaning and replacement are required more often.
3)
Performed by authorized service workshop.
● = Described in this manual
♦ = Not described in this manual
Check/adjust throttle cable
●
Check the condition of belts, belt pulleys
● ●
Change the engine oil
1)
● ●
Replace the engine oil lter
● ●
Clean/replace the spark plugs
● ●
Replace the fuel lter
● ●
Replace the air lter (paper lter)
2)
● ●
Check the caster wheels (every 200 hours)
●
Replace the air cleaner’s pre-lter
2)
(foam)
●
Check/adjust the mower deck
● ●
Check the engine valve clearance
3)
♦ ♦
Perform the 300-hour service
3)
♦ ♦
Lubricate according to Lubrication Schedule
● ● ● ● ●
Check hydraulic oil at reservoir
●
Change hydraulic oil & lter (200 hours)
● ●
Maintenance Before After
Daily Weekly At
least
once
each
year
Maintenance interval
in hours
25 50 100 300