Filter
Top Products
9
ASSEMBLY
2
MOUNTING BLOWER ASSEMBLY
OUTER PULLEY COVER
PIN
HAIRPIN COTTER
3
INSTALLING DRIVE BELT
REAR OF DECK
IDLER PULLEYS
OUTER PULLEY
TWIST IN BELT
TENSION RELEASE LEVER
1. Install the front and rear mount brackets to the
deck with the pin and hairpin cotter supplied with
the kit.
1. Make sure the tension release lever is forward
or disengaged.
2. Place the belt over the pulley on the deck. Refer
to illustration for proper routing.
3. Move the tension release lever to the rear and
engage in the latch.