Open as PDF
Always observe safety rules when performing any
• Before each use check for loose fasteners.
• Clean unit thoroughly after each use.
For best results mower blades must be kept sharp.
Replace bent or damaged blades.
• See BLADE CARE instructions in your mower
BEFORE PERFORMING MAINTENANCE,
SERVICE OR ADJUSTMENTS:
Set parking brake.•
Place motion control levers in “NEUTRAL” •
Place clutch control in “DISENGAGED” •
Turn ignition key to “OFF” position.•
Make sure blades and all moving parts have •
Disconnect spark plug wire(s) from spark •
plug(s) and place wire where it cannot come
in contact with plug.
Grass catcher components are subject to wear,
damage and deterioration, which could expose
moving parts or allow objects to be thrown.
Frequently check components and replace
with manufacturer’s recommended parts when
When grass catcher is to be stored for a period
of time, clean it thoroughly, remove all dirt, grass,
leaves, etc. Store in a clean, dry place.
Do not leave grass in bagger containers. Empty
containers after each use and before storing.
Failure to do so may result in spontaneous
combustion which could develop into a ﬁ re.