Dixon 42 / 968999713 Brush Cutter User Manual


 
English-34
Daily Weekly At Maintenance Interval
Least In Hours
Once
Each
Year
Maintenance Page Before After 25 50 100 300
Check the parking brake z
Check the engines oil level (every refueling) z
Check the safety system z
Check for fuel and oil leakages
Check/clean the engine’s cooling air intake z
Check the mower deck z
Check hardware (screws, nuts, etc) z
Clean under the mower deck z
Start the engine and blades, listen for unusual sounds
Check for damage
Thoroughly clean around the engine
Clean around belts, belt pulleys, etc.
Check the tire pressures z
Check battery z
Sharpen/replace mower blades z
Check the fuel pump’s air tilter
2)
z
Clean the engine’s cooling air intake
2)
zz
Clean the air cleaner’s pre filter
2)
(foam) zz
Clean the air cleaner’s filter cartridge
2)
(paper filter) zz
Check/adjust the parking brake 
Inspect muffler/spark arrester 
Maintenance Schedule
The following is a list of maintenance procedures that must be performed on the machine. For those points not
described in this manual, visit an authorized service workshop. An annual service carried out by an authorized
service workshop is recommended to maintain your machine in the best possible condition and to ensure safe
operation.
Read “Maintenance” in the Safety Instructions section.
z = Described in this manual
= Not described in this manual
1)
First change after 5-8 hours. When operating with a heavy load or at high ambient temperatures, replace every 50 hours.
2)
In dusty conditions, cleaning and
replacement are required more often.
3)
Performed by authorized service workshop.
MAINTENANCE