Dixon 42 / 968999713 Brush Cutter User Manual


 
English-30
OPERATION
In order, for example, to turn right while
moving forward, move the right control
towards the neutral position. The rotation of
the right wheel is reduced and the machine
turns to the right.
Turning on the spot can be achieved by
moving one control backward (behind the
neutral position) and carefully moving the
other steering control forward from its neutral
position.
Operating on hills
Read the Safety Instructions “Driving on Slopes” in the
“Safety Instructions”.
The slowest speed possible should be used
before starting up or down hills.
Avoid stopping or changing speed on hills.
If stopping is absolutely necessary, pull drive
levers into the neutral position and push to
the outside of the unit and engage the
parking brake.
To restart movement, release the parking
brake.
Pull the control levers back to the center of
the mower and press forward to regain
forward motion.
Make all turns slowly.
WARNING!
Do not drive up or down hills with
slopes greater than 10 degrees.
Do not drive across slopes.
IMPORTANT INFORMATION
Control levers return to neutral when
released. This may cause the mower to
suddenly stop.
Stopping conditions
8050-801
Released parking brake
8050-783