Dixon 42 / 968999713 Brush Cutter User Manual


 
English-27
OPERATION
When the engine starts, immediately release
the ignition key back to the run position.
Set the desired engine speed with the
throttle.
Allow the engine to run at a moderate speed,
“half throttle”, for 3-5 minutes before loading
it too heavily.
USE FULL THROTTLE WHEN MOWING
(no choke).
Return to run position
8050-781
STOP
IMPORTANT INFORMATION
Do not run the starter for more than 5
seconds each time. If the engine does not
start, wait about 10 seconds before
retrying.
Set the engine speed
WARNING!
Engine exhaust and certain
vehicle components contain or
emit chemicals considered to
cause cancer, birth defects or
other reproductive system
damage. The engine exhaust
contains carbon monoxide,
which is a odorless, colorless,
poisonous gas. Do not use the
machine in enclosed spaces.