Filter
Top Products
CARE & MAINTENANCE
ELECTRICAL SYSTEMS:
Keep all connections clean and tight.
CLEANING THE MOWER:
Wash mower periodically. Clean above and below
deck.
High pressure washing and alkaline based soaps can
cause damage to bearings and other parts of the mower.
After washing your mower, start the engine and engage
the mower deck for a few minutes to disperse any water
that may have accumulated in bearings, pulleys or fans.
Note: Allow mower to cool before washing. If bearings
are hot, they will draw moisture inside as they
dry and cause corrosion.
SERIAL NUMBERS:
The serial number is located on frame at rear of
engine.
WARRANTY:
Refer to warranty information (page 13).
PARTS/SERVICE:
See your Dixon dealer for replacement parts,
warranty or service.
42