Filter
Top Products
CARE & MAINTENANCE
BELTS:
Check belts every 50 hours. Replace any belts found to
be in poor condition.
BELT TENSION:
42” Deck
Mower Deck Serpentine Belt-P/N 6109
Manual adjustment. Refer to illustration below.
Engine to Mower Deck Belt-P/N 6111
Manual adjustment. Refer to illustration below.
36” Deck
Engine to Mower Deck Belt-P/N 61515
Manual adjustment. Refer to illustration below.
33
Idler Weldment
“L” Rod
Idler Shock
Mount
Hex Nut
Tighten or Loosen
Hex Nut to achieve
this dimension
3/4”