Filter
Top Products
CARE AND MAINTENANCE
MOWER DECK LEVELING PROCEDURE:
1. Place mower on a smooth, level surface and
check tire pressures to insure correct stance.
Tires should be inflated as follows.
Front: 16 - 21 lbs
Rear: 8 - 14 lbs
2. Turn each outer blade tip to align with the deck
in a side to side manner.
3. Measure from the floor surface up to thebottom
of the blade tip on the discharge side of the
mower. Retain this measurement. Move to the
opposite side and check to see if that
measurement is the same. If adjustment is
required, turn nut on one or both of the rear
L-rods until both measurements are equal.
4. Turn each outer blade tip to align with the deck
in a front to rear manner.
5. Measure from the floor surface up to the bot-
tom of the blade tips at both the front and rear
of the blades. Rear of blade tips should be to
1/8" to 1/4" higher than the front of blade tips.
If adjustment is necessary, turn nut on front L-
rod.
36