Filter
Top Products
8- ENG
A08989
OPERATING INSTRUCTIONS
BASIC ELEMENTS OF A
PRESSURE WASHER
High-pressure pump (located inside
the shroud): Increases the pressure of
the water supply.
Engine: Drives the high pressure
pump.
High-pressure hose:
Carries the
pressurized water from the pump to
the gun and spray wand.
Spray gun: Connects with spray
wand to control water flow rate,
direction, and pressure.
Multi-adjustable spray wand: Allows
the user to use high or low pressure
and adjusts from a pencil stream (0°)
to a wide angle fan spray (40°). See
How To Use Wand instructions in this
section.
Compare the illustrations with your unit to familiarize yourself with the location
of various controls and adjustments. Save this manual for future reference.
High-pressure
pump (located
inside the
shroud)
Detergent injection system rinsing
hose (not shown): Rinses the
detergent injection system after use
of cleaning solution.
Dual-detergent injection system:
Depending on the cleaning task,
switch from one cleaning solution
to another by simply turning the
detergent selection dial.
Engine
High-pressure
hose
Spray
gun
Multi-adjustable
spray wand
Dual-detergent
injection system
BASIC ELEMENTS OF AN
ENGINE
Refer to the engine manual for
location and operation of engine
controls.
Choke control:
Opens and closes
carburetor choke valve.
Throttle control lever: Controls
engine speed.
Starter grip: Pulling starter grip
operates recoil starter to crank engine.
Fig. 8