Filter
Top Products
www.desatech.com
7122393-01A
Deflector
Screw (C)
Deco
Grate
Pillar
13. Attach grate assembly to burner support
plate using 3 screws, (C) one through bot-
tom of each deco grate pillar (see Figure
7, page 6).
14. Position 3 top support pillars over pillar
support connectors. Secure each set with
1 screw (C) each (see Figure 8).
15. Place deflector over top support pillars
and deco grate pillars. Attach deflector to
deco grate pillars with 3 screws (C). See
Figure 8.
Figure 9 - Table Top Assembly
Table Top
ASSEMBLY
Continued
Figure 10 - Table Top Installation
Table Top
Support
Pillar
Figure 8 - Deector and Top Support
Pillar Assembly
Top
Support
Pillar
Pillar
Support
Connector
Screw (C)
Screw (F)
Bracket
Slide
Brackets
Inside
Support
Pillars
Screw (D)
16. Lay table top upside down on a blanket
or piece of cardboard to prevent scratch-
ing. Attach 3 brackets with 9 self tapping
screws (F) as shown in Figure 9.
17. Turn table top right side up. Slide brackets
into top support pillars. Attach with 1 screw
(D) each through support pillar and into
bracket (see Figure 10).