Filter
Top Products
Page 18
JOHN DEERE 8000 TRACK MOUNTING BRACKETS AND SKID
Front of Tractor
Rear of Tractor
REF.
NO.
PART
NO.
QTY.
DESCRIPTION
1. 12315-35 1 Right Baseplate for Sidequest
2. 12316-35 1 Left Baseplate for Sidequest
3. 02851 83/4”-10UNC x 8.50 Hex Head Bolt (Gr. 5)
4. 02961 83/4”-10UNC Nylon Insert Lock Nut
5. 12317 12 20mm-2.5 x 250mm Hex Bolt
6. 12186-95 4 Top Pin 1.25 x 10.25
7. 02397 8 Lynch Pin
8. 12185-35 4 Extension Arm
9. 00085 24 1/2” Flat Washer
10. 01254 24 1/2”NC x 1.50 Hex Head Bolt (Gr. 5)
11. 02178 24 1/2”NC Nylon Insert Lock Nut
12. 35631 2 350gal. Skid Assembly (tank not shown)
- 35632 2 500gal. Skid Assembly (tank not shown)
1
2
9
10
10
9
8
8
7
7
7
7
6
6
5
4
4
4
4
3
3
3
3
5
9
10
10
9
12
11
11
12
Use existing 6 washers
From removed track bolts
Installation John Deere 8000 Track
Use any three holes in a row of the five
holes depending on the track width. When
position is determined remove every other
bolt of the six bolts in the track mount, that
will match up with the three bolts (#5) in
the bracket. Repeat for other side of track
mounting. On the row of bolts to the front
of the tractor, hold bolts in bracket up to
just short of flush of the bottom of bracket,
secure in that position with vice grips. Also
adjust track so bolts will miss lugs. Then
slide in place and tighten all bolts. See
diagram.