Cub Cadet Tank S S7237 Lawn Mower User Manual


  Open as PDF
of 48
 
31se c t i O n 6 — Ma i n t e n a n c e & ad j u s t M e n t s

adapter onto one of the deck wash nozzles at either end of
the mower deck. Release the lock collar to lock the adapter

Turn on the water supply. 4.
5.


Turn off the water supply. 6.
7.
the adapter from the nozzle.
Repeat the previous steps to clean the deck using the 8.
nozzle at the other end of the deck.
Cleaning the Spindle Pulleys

accumulation of grass clippings from around the spindle pulleys
and V-belt. Clean more often when mowing tall, dry grass.
Front wheel2.
a.
and raise the caster wheel so that the tire is an inch
off the ground.
Loosen and remove the locknut from the axle b.
assembly and pull the axle assembly from the yoke.
The wheel and two spacer sleeves will drop free.
c.
through a spacer sleeve, a wheel, the other spacer
sleeve and finally through the other side of the yoke.
Tighten the locknut on the end of the axle assembly.d.
Lower the mower off the jack and continue mowing. e.

the wheel placed in a large bucket of water. Carefully inspect the
tire, rim and valve for escaping air bubbles which indicate a leak.
Mark each leak with a yellow marking crayon and then deflate
the tire to 8 psi and repeat the inspection. If the leaks you find
are pin hole size to ⁄
leaks are larger than ⁄
tire bead is damaged, the tire can be repaired or the tire will have
to be replaced.
Lubrication
Using a pressure lubricating gun, lubricate all grease 
fittings and points as noted in the Lubrication Chart.
Lubricate all other pivot points with a quality lubricating oil 

Using the Deck Wash System
WARNING! When using the deck wash system, never
engage the deck from any position other than the

engage deck in the presence of any bystanders.


chemicals. Complete the following steps after each mowing:
NOTE: 
away from people, children, animals, and your house, garage,
parked cars, etc.
Attach the nozzle adapter to a standard garden hose 
connected to a water supply.
Move the tractor to an area within reach of the hose where 2.
the dispersal of wet grass clippings is not objectionable to

stop the engine.
Nozzle
Adapter
Adapter
Lock Collar
Pull Lock
Collar Back
Deck Wash Nozzle
Figure 6-5
 previous next