Filter
Top Products
2
• IMPORTANT SAFETY INSTRUCTIONS •
RULES FOR SAFE OPERATION
READ ALL INSTRUCTIONS BEFORE OPERATING
• Read the instructions carefully. Be familiar with the controls
and proper use of the unit.
• Carefully read and understand the entire manual’s instructions
before operating the attachment in order to ensure the safety
of the operator and any bystanders. Pay close attention to the
operating instructions and safety warnings. Please keep these
instructions for later use.
• Use only as described in this manual.
• Use only genuine original equipment manufacturer replacement
parts and accessories as specified in this manual. These are
available from your authorized service dealer. Use of any non-
original parts or accessories could lead to serious injury to the
user, or damage to the unit, and void your warranty.
• Stay alert – Do not operate this attachment when tired, ill, or
under the influence of alcohol, drugs, or medication.
• Keep Children Away – Clear the area to be cut before each
use. Remove rocks, broken glass, nails, wire, string and other
objects which may be thrown or become entangled in the
cutting attach-ment. Clear the area of children, bystanders
and pets; keep them outside a 50-foot (15 m.) radius, at a
minimum. Even then, they are still at risk from thrown
objects. Encourage bystanders to wear eye protection. If you
are approached, stop the unit immediately.
• Children and teens under the age of 15 must not use the unit,
except for teens guided by an adult.
• Do not allow unit to be used as a toy. Close attention is
necessary when used by or near children.
• Do not put any object into openings. Do not use with any
opening blocked - keep free of dust, lint, hair and anything
that may reduce airflow.
• Dress properly – Do not wear loose clothing or jewelry, they
can be caught in moving parts. Wear protective hair covering
to contain long hair. Do not wear short pants, sandals or go
barefoot. Use of rubber gloves and substantial footwear is
recommended when working outdoors.
• Use extra care when cleaning on stairs.
• Wear safety glasses or goggles that are marked as meeting
ANSI Z87.1-1989 standards. Safety glasses are available at
your local hardware store. Also wear ear/hearing protection
when operating this unit. Wear a face or dust mask if the
operation is dusty. Long sleeve shirts are recommended.
• Use the right tool. Only use this tool for its intended purpose.
• Store the unit indoors. Lock up the unit to prevent unauthorized
use or damage and to keep out of the reach of children.
OTHER SAFETY WARNINGS
• Inspect the unit before use. Replace damaged parts. Make
sure all fasteners are in place and secure. Replace cutting
attachment parts that are cracked, chipped or damaged in
any way. Make sure the cutting attachment is properly
installed and securely fastened. Be sure that the cutting
attachment shield is properly attached, and positioned as
recommended. Failure to do so can result in personal injury to
the operator and bystanders, as well as damage to the unit.
• Never use metal-reinforced line, wire, chain or rope. These
can break off and become dangerous projectiles.
• Be aware of risk of injury to the head, hands and feet.
• Be sure to secure the unit while transporting.
• Never douse or squirt the unit with water or any other liquid.
Keep handles dry, clean and free from debris. Clean after each
use. See the Cleaning and Storage instructions.
• Keep these instructions. Refer to them often and use them to
instruct other users. If you loan someone this unit, also loan
them these instructions.
WHILE OPERATING
• The cutting attachment shield must always be in place while
operating the unit. Do not operate unit without both trimming
lines extended, and the proper line installed. Do not extend
the trimming line beyond the length of the shield.
• Be sure the cutting attachment is not in contact with anything
before starting the unit.
• Use the unit only in daylight or good artificial light.
• Do not overreach. Always keep proper footing and balance.
• Always hold the unit with both hands when operating. Keep a
firm grip on both handles or grips.
• Keep hands, face, and feet at a distance from all moving parts. Do
not touch or try to stop the cutting attachment when it rotates.
• Always stop the unit when cutting is delayed or when walking
from one cutting location to another.
• If you strike or become entangled with a foreign object, stop
the unit immediately and check for damage. Do not operate
before repairing damage. Do not operate the unit with loose
or damaged parts.
• Stop the unit for maintenance or repair.
• Keep unit clean of vegetation and other materials. They may
become lodged between the cutting attachment and shield.
• Do not force appliance-It will do the job better and with less
likelihood of a risk of injury at the rate for which if was designed.
SAVE THESE INSTRUCTIONS