Filter
Top Products
5
TO THE OWNER
The Cub Cadet 45-inch Snow Thrower Attachment, Model Number 353, is designed for use on Cub Cadet Series
3000 Tractors. Contained in this manual are instructions for the installation and use of the snow thrower assembly
with these tractors.
Please keep this manual. The instructions in this manual explain the minor assembly required; installation and sea-
sonal removal; and the adjustment, operating and maintenance procedures for the snow thrower assembly. Read
this manual carefully to familiarize yourself with the equipment before you install and operate the snow thrower.
The Front Hitch System, Model 190-343-100, MUST be installed on the tractor to allow installation of the
Snow Thrower Attachment.
The Hydraulic Angling Kit accessory, Model 190-288-100, for the Front Hitch System SHOULD NOT be used
with the Snow Thrower Attachment. Accidental activation of the angling system could cause damage to
both the snow thrower and tractor.
Read and observe all WARNING and CAUTION statements. They are included to provide for the protection of the
equipment installer and user, and to ensure prolonged service life of the equipment.
WARNING
To increase traction and stability of the tractor when using the snow thrower attachment, it is recommended that
rear wheel weights, or the rear weight bracket with a minimum of three suitcase weights, be installed on the
tractor. The Rear Wheel Weight Kit is available through your Cub Cadet dealer by ordering kit number 190-412.
The Rear Weight Bracket Kit is available as kit number 190-413, which includes only the bracket and mounting
hardware. The individual suitcase weights can be ordered under part number 759-3389.
NOTE
References to LEFT and RIGHT indicate the left and right sides of the tractor when facing forward in the driver’s
seat, unless specifically instructed to reference from a different position on the tractor. Reference to the FRONT
indicates the grille end of the tractor; to the REAR indicates the draw bar end.