Cub Cadet 2200H Pressure Washer User Manual


 
9
SHUTTING DOWN & CLEAN-UP
Step1
Remove
detergent suction tube
from container and
insert into one gallon
of fresh water. Siphon
water at low pressure
for one minute.
Step2
Turn off the engine.
Step3
Turn off the water
source.
Step4
Press trigger to
release water
pressure.
Step5 Disconnect the
garden hose from the
water inlet on the unit.
TAKING A BREAK... five minutes or more
Step1
Turn off the engine. Step2 Press trigger to
release water pressure.
Step3 Engage gun safety
lock.
WINTERIZING AND LONG-TERM STORAGE
1. Disconnect all water connections.
2. Start the machine for a few seconds,
until the water which had remained in
the pump exits. Turn off immediately.
3. Drain the gas and oil from the engine.
4. Do not allow high pressure hose to
become kinked.
5. Store the machine and accessories in
a room which does not reach freezing
temperatures. The machine should not
be placed near an open flame i.e.
furnace, hot water heater etc.
Caution: Failure to follow the above
directions will result in damage to the
pump assembly and accessories.
Step6 Disconnect the high pressure hose from the high
pressure outlet and engage the gun safety lock.