Filter
Top Products
8
WORKING WITH DETERGENT
Detergents can only be applied in the “low” setting.
Step1 Slide the detergent tray into one
of the slots of your choice. Secure the tray
to the frame by fastening the screw.
Step2 The wand must be set in the low
pressure (-) position to apply detergents.
Step3 Fill a container with Cub Cadet
detergent. Place the filter end of detergent
suction tube into the container. Be sure to
adjust the filter by turning it to the desired
detergent intake.
Step4 With the engine running, pull
trigger to operate unit: Liquid detergent is
drawn into the unit and mixed with water.
Apply detergent to work area. Do not allow
detergent to dry on surface.
For best results see Cleaning Tips on
pages 9 & 10 for specific information
on how to clean different surfaces.
Caution
Never use:
• Bleach, Chlorine products and other
corrosive chemicals
• Liquids containing solvents (i.e., paint
thinners, gasoline, oils)
• Tri-sodium phosphate products
• Ammonia products
• Acid-based products
These chemicals will harm the unit and
will damage the surface being cleaned.
Always Use Cub Cadet Detergents for
Best Results.
Cub Cadet biodegradable detergents are
specially formulated to protect the
environment and your pressure washer.
Special formula won’t clog the suction tube
filter and will protect the internal parts of
the pressure washer for a longer life. For
Cub Cadet Detergents, check your local
Cub Cadet dealer. If you need help locating
a dealer in your area, contact the Customer
Dealer Referral Line by calling:
1-877-835-7841
One gallon container of the following Cub
Cadet detergents are available:
• Vehicle Wash Part No. KR-9103501
• Deck Wash Part No. KR-9103502
• Degreaser Part No. KR-9103503
• All Purpose Part No. KR-9103504
Cleaner