Cub Cadet 1400E Pressure Washer User Manual


 
USING THE ACCESSORIES
5
This wand features a 0º pencil jet which rotates 360º for maximum dirt cutting action,
effectively increasing cleaning performance up to 50%. This wand combines the cleaning
performance of a 0º pencil jet with the surface coverage of a wide angle nozzle.
Not recommended for soft materials, siding, painted surfaces, decks or autos.
Rotating spray wand
Vario spray wand
The Vario spray wand allows you to adjust the cleaning pressure. To clean at maximum
pressure, the Vario wand must be positioned to the high pressure setting (+).
To apply detergent, the wand must be positioned to the low pressure setting (-).
For lower
pressure turn
wand collar in the
minus (-) direction.
For higher
pressure turn
wand collar in the
plus (+) direction.
GFCI INSTRUCTIONS
6
WORKING WITH DETERGENTS
Detergents can only be applied at low pressure (-).
Step 1 Install the Vario spray wand.
Set the Vario spray wand to the low pressure
setting (-) by turning the wand collar. The
wand must be set in the low pressure (-)
position to apply detergents.
Step 3 Turn on the pressure washer.
Pull trigger to operate unit: Liquid detergent
is drawn into the unit and mixed with water.
Apply detergent to work area. Do not allow
detergent to dry on surface.
For best results see Cleaning
Tips on pages 8 & 9 for specific
information on how to clean
different surfaces.
Always Use Cub Cadet
Detergents for Best Results.
Cub Cadet biodegradable detergents are
specially formulated to protect the
environment and your pressure washer.
The special formula wont clog the suction
tube filter and will protect the internal
parts of the pressure washer for a longer
life. For Cub Cadet Detergents, check
your retailer or call:
Step 2 Fill the detergent reservoir with
Cub Cadet detergent. Place the filter end of
detergent suction tube into the detergent
reservoir
Caution
Never use:
Bleach, Chlorine products and other
corrosive chemicals
Liquids containing solvents
(i.e., paint thinners, gasoline, oils)
Tri-sodium phosphate products
Ammonia products
Acid-based products
These chemicals will harm the unit and
will damage the surface being cleaned.
WARNING
TO AVOID SERIOUS INJURY,
NEVER POINT SPRAY NOZZLE
AT YOURSELF, OTHER PER-
SONS OR ANIMALS.
Dealer Referral Line
1-877-835-7841
or visit our website: www.cubcadet.com
Step 1 Plug the Ground
Fault Circuit Interrupter (GFCI)
into a working outlet.
Step 2 Press TEST, then
press RESET to assure proper
connection to power.
Note:
The actual
appearance
of the GFCI
may be
different
from this
illustration.
The following Cub Cadet detergents
are available:
Vehicle Wash Deck Wash
Part # KR-9103501 Part # KR-9103502
Degreaser All Purpose Cleaner
Part # KR-9103503 Part # KR-9103504