Craftsman 987.799601 Chipper User Manual


 
MAINTENANCE AND STORAGE:
When equipment is stopped for servicing, inspection,
storage, or to change an attachment or accessory,
make sure the spark ptug wire is disconnected from the
spark plug Allow the engine to cool before making any
inspections, adjustments, etc
Maintain equipment and atl attachments and acces-
sories in safe working condition°
Never perform any maintenance while engine is running
or when spark plug wire is connected to spark plug,
except where specifically instructedto do so_
Never store this equipment with fuel in the fuel tank
inside a building where fumes may reach an open flame
or spark, or where ignition sources are present such as
hot water and space heaters, furnaces, clothes dryers,
stoves, electric motors, etco
Allow engine to cool before storing in any enclosure.
Store gasoline in a cool, well-ventilated area, safely
away from any spark- or flame-producing equipment.
Store gasoline in an approved container, safely out of
the reach of children.
. Use only original equipment replacement parts° Parts
manufactured by others could present a safety hazard
even though they may fit on this equipmenL
Store this equipment where children will not have
access. Always disconnect the spark plug wire from the
spark plug to prevent accidental starting_
Check collection bag frequently for deterioration or wear
and replace worn bags. Use only original equipment
replacement bags. Bags manufactured by ethers could
present a safety hazard.
Refer to "Off Season Storage" in this Manual for impor-
tant storage instructions ifequipment is to be stored for
an extended period.
SAFETY DECALS:
Make certain that all safety decals on this equipment are
kept clean and in good condition. The decals are shown
on Page 35 of this Manual