Filter
Top Products
SERVICE AND ADJUSTMENTS
TO ADJUST ATTACHMENT LIFT SPRING
(See Fig. 31)
• While holding spring bushing withwrench,loosen jam
nut.
• Turn adjustment bolt crockwise to extend spring and
reduce lift effort for heavier attachments.,
° Turn adjustment bolt counterclockwise for lighter' at-
tachments°
• Retighten jam nut against spring bushing.
IMPORTANT: DO NOT ADJUST FORMAXIMUM SPRING
TENSION WHEN USING LIGHT ATTACHMENTS SUCH
AS A MOWER.. ADJUST LIFT LEVER SPRING TO AID IN
LIFTING ATTACHMENT_ DO NOTOVERPOWER SPRING.
WHEN REMOVING ATTACHMENT, ALWAYS ADJUST
SPRING TENSION TO ITS LOWEST POSITION_
TO REMOVE HOOD AND GRILL ASSEMBLY
(See Fig. 32)
• Raise hood,,
• Unsnap headlight wire connector_
• Stand infrontoftractor_ Grasp hoodat sides,tilt toward
engine and lift off of tractor.,
• To replace, reverse above procedure.
ADJUSTMENT'
SPRING BUSHING
¢
JAM NUT
ATTACHMENT
LIFT SPRING
°/
FIG. 31
"_" HEADLIGHT
/ WIRE
"_ CONNECTOR
FIG. 32
24