Filter
Top Products
,ll iii1,,,,__ _...........
SERVICE AN ADJUSTMENTS
.................. ,,, i i iii, i
TO ADJUST STEERING WHEEL ALIGNMENT
If steering wheel crossbars are not horizontal (left to right)
when wheels are positioned straight forward, remove steer-
ingwheel and reassemble per instructions in the Assembly
section of this manual
FRONT WHEEL TOE-INICAMBER
The front wheel toe-in and camber are not adjustable on
your tractor° If damage has occurred to affect the front
wheel toeqn or camber, contact your nearest authorized
service center/department.
TO REMOVE WHEEL FOR REPAIRS
(See Fig. 28)
• Block up axle securely
o Remove axle cover, retaining ring and washers to allow
wheel removal (rear wheel contains a square key - Do
not !ose),
o Repair tire and reassemble,
, On rear wheels only: align grooves in rear wheel hub
and axle Insert square key.
Replace washers and snap retaining ring securely in
axle groove.
o Replace axle cover
NOTE: To seat tire punctures and prevent flat tires due to
slow leaks, tire sealant may be purchased from your local
parts dealer° Tire sealant also prevents tire dry rot and
corrosion,,
WASHERS
RETAINING
AXLE COVER
f
_SQUARE KEY (REAR
WHEEL ONLY)
FIG. 28
25