To Unfold Handle
Raise the handle section into place and
secure by tightening the two knobs. See
figure below.
WARNING: For your own safety DO NOT
use this mower without either the
Grasscatcher or Mulch Insert in operating
position.
Knobs Handle
/
/
GRASSCATCHER ASSEMBLY
• Slide the grassbag onto the grasscatcher
frame. (See Fig. A)
• The grassbag has attachment clips sewn
around the bag opening.
• Attach the two top clips to the frame,
then attach the side clips, and lastly the
bottom clip. (See Fig. B)
• Refer to "To Install Grasscatcher" instruc-
tion before attaching to mower.
TO INSTALL GRASSCATCHER
• Reach down between the mower handle
and raise the rear door to a vertical posi-
tion. (See Fig. A)
• Remove the mulch insert. See page 12
"To Remove Mulch Insert".
• Pick up the grasscatcher by the handle
and lower the grasscatcher between the
lawnmower handles. Position the grass-
.catcher hanger hooks on the metal rod
under the rear door. (See Fig. B).
• Release the rear door.
WARNING: Never operate the mower
unless the hanger hooks on the grass-
catcher are seated properly, and the rear
discharge door rests firmly against the top
of the grasscatcher.
6