Filter
Top Products
Hopper*
ChipperChute
Discharge Chute
Bottle
of Oil
Safety
Glasses
Catcher Bag
* The hopper is packedin the topinsert
inyourchipper-shreddercarton.
Figure 1
IMPORTANT: Thisunitisshippedwithout gasoline
or oil inthe engine,Al_erassembly,see
OPERATION sectionofthismanualforproperfuel
and engine oilfill-up.
NOTE: Todetermine rightand left hand sidesof your
chipper-shredder, standbehind the unitwith the
engine farthest away from you.
Yourchipper-shredderhasbeencompletelyassembled
atthefactory, exceptforthehopperassembly,chipper
chute,dischargechuteandthecatcherbag.
These parts are shippedlooseinthe carton.A pairof
safetyglasses and a bottleofoil are also includedin
thecanon.
UNPACKING FROM CARTON
Cut the cornersof the canon.
Remove all packing inserts.
Remove all loose parts includingowner's
manual.See figure 1.
Rollchipper-shredderoutofthecanon.
Make certainall partsand literaturehave been
removedbefore the cartonis discarded.
LOOSE PARTS
(Refer tofigure 1.)
a, Hopper Assembly
b. DischargeChute
c. Chipper Chute
d. Catcher Bag
e. Bottle of Oil
f. Safety Glasses
g. Owner's Manual (not shown in figure 1)
TOOLS REQUIRED
1. 1/2"or AdjustableWrenches
2. 7/16" orAdjustableWrenches
3. 9/16"or AdjustableWrenches
4. Funnel
DISCONNECTING SPARK PLUG
Disconnect the sparkplug wire and move it
awayfrom the spark plug before assemblingthe
chipper-shredder. See figure 2.
SparkPlugWire
Figure 2
ATTACHING DISCHARGE CHUTE
Remove thewingknobs from each sideofthe
discharge openingon the chipper-shredder.See
figure3.
Usingtwo7/16"wrenches, removehex locknut,
twospacers, and the bexbolt fromtop ofthe
housingassembly.Foreasy assembly,do not
remove thesecondspacerfromthe hexbolt.
Placethedischargechute in positionon the
dischargeopening.Inserthexboltandspacer