Filter
Top Products
CUSTOMER RESPONSIBILITIES
SERVICERECORDS
Fillin datesasyou Before
completeregular Each
service, Use
Check Engine Oil Level _J
Change Engine Oil
Often
Every Every Every
5 10 25 Each Before SERVICE
Hours Hours Hours Season Storage DATES
"nghten All Screws and _/ _j
Nuts
Check Spark Plug
Lubricate All Pivot
Points
I Lubricate Disc Drive
Plate Zerk
(See Maintenance)
Check Fuel
t
Drain Fuel
Check Cable
Adjustment
(See Cable Adjustment)
Adjust Drive Belt
.j
GENERAL RECOMMENDATIONS
The warranty on this snow thrower
does not cover items that have been
subjected to operator abuse or negli-
gence. To receive full value from the
warranty, the operator must maintain
the snow thrower as instructed in this
manual.
Some adjustments will need to be
made periodically to properly maintain
your snow thrower.
All adjustments in the Service and Ad-
justments section of this manual
should be checked at least once each
season.
AFTER EACH USE
• Check for any loose or damaged
parts.
• _ghten any loose fasteners,
• Check and maintain the auger.
• Check controls to make sure they
are functioning properly.
F-001087J
• If any parts are worn or damaged,
replace immediately.
LUBRICATION CHART
Lubricate
Disc Drive
Plate Zerk
With a Hi
Temp EP.
Moly \
Grease.
17
Figure 15