Craftsman 536.88626 Snow Blower User Manual


 
CUSTOMER RESPONSIBILITIES
SERVICERECORDS
Fill indatesas you Before
completeregular Each
service. Use Often
Check Engine Oil Level
! Change Engine Oil
]]ghten All Screws and _ ._
Nuts
Check Spark Plug
Lubncate All Pivot
Points
Every Every Every
5 10 25 Each Before SERVICE
Hours Hours Hours Season Storage DATES
,j
Lubricate Disc Drive
Plate Zerk
(See Maintenance)
Check Fuel
Drain Fuel
Check Cable
Adjustment
(See Cable Adjustment)
Adjust Drive Belt
GENERAL RECOMMENDATIONS
The warranty on this snow thrower
does not cover items that have been
subjected to operator abuse or negli-
gence. To receive full value from the
warranty, the operator must maintain
the snow thrower as instructed in this
manual.
Some adjustments will need to be
made periodically to properly maintain
your snow thrower.
All adjustments in the Service and Ad-
justments section of this manual
should be checked at least once each
season.
AFTER EACH USE
Check for any loose or damaged
parts.
Tighten any loose fasteners.
Check and maintain the auger.
Check controls to make sure they
are functioning propedy.
F-001088J
If any parts are worn or damaged,
replace immediately.
LUBRICATION CHART
Lubricate
Disc Drive
Plate Zerk
With a Hi
Temp EP ..
Moly "
Grease.
17
Figure 15