Filter
Top Products
KNOW YOUR SNOW THROWER
READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING
YOUR SNOW THROWER. Compare the illustrations with your SNOW THROWER
to familiarize yourself with the location of various controls and adjustments. Save
this manual for future reference.
Auger
Electric Drive Lever
Start (right hand)
Button
Primer
nition Bu Switch
-- Traction Drive Lever
(left hand)
, Remote
Chute Control
Lever Crank
Assembly
-'Chute Deflector
Discharge
Chute
Choke
Recoil Height
Control Throttle Starter Adjust
Control Handle Skid
Figure 10
Auger Drive Lever - Starts and stops
the auger and impeller (snow gathering
and throwing)
Traction Drive Lever - Propels the
snow thrower forward and in reverse.
Speed Shifter Lever - Selects the
speed of the snow thrower (6 speeds for-
ward and 2 speeds reverse).
Crank Assembly - Changes the direction
of snow throwing through the discharge chute.
Chute Deflector - Changes the distance
the snow is thrown.
Discharge Chute - Changes the height
and direction the snow isthrown.
Height Adjust Skid - Adjuststhe ground
clearance of the auger housing.
ignition Key - Must be inserted to start
the engine.
Recoil Starter Handle - Starts the en-
gine manually.
F-001088J
11
Choke Control - Used to start a cold
engine.
Primer Button - Injects fuel directly into
the carburetor manifold for fast starts in
cold weather.
Remote Chute Control Lever - Push
forward to discharge snow high and far.
Pull remote lever back to discharge snow
down.
Throttle Control - Controls the engine
speed.
Electric Start Button - (if so equipped)
Used to start the engine using the 120 V elec-
tric starter.
Shear Pin -Shear pins are designed to
break (to protect the machine) if an ob-
iect becomes lodged in the aguer hous-
ing.
Toolbox -spare shear pins and spacers
are located in toolbox.