Filter
Top Products
8
FIGURE 12
ELASTIC HOOK
FRONT FLAP
TIE STRAPSTIE STRAPS
LOWER
HOOD
STEP 11:
(SEE FIGURE 12)
• With the tractor's hood still raised, place the snow cab
canopy onto the tubing frame and drape the front fl ap
down in front of the tractor's dash panel. Lower the
hood, trapping the front fl ap under the hood. Secure
the sides of the canopy by fastening the elastic hooks
to the bottom edge of the footrest and fender. Tie the
straps at back of canopy to the upright tubes. Any
levers or handles on snow throwers or snow blades
should be located outside of the cab.
FIGURE 11
FRONT BRACE ROD
RAISE HOOD
STEP 10:
(SEE FIGURE 11)
• Raise the tractor's hood.
• Insert the ends of the front brace rod into a set of
holes in the U-tube and then swing the rod down to
rest the bottom of the brace rod on top of the dash
panel. To increase the effective support length of the
rod, move the ends of the rod to the inner set of holes
in the U-tube.