Filter
Top Products
5
Call 1-866-576-8388 for missing parts or assembly help
DO NOT RETURN TO STORE
ASSEMBLY
TOOLS REQUIRED FOR ASSEMBLY
(2) 7/16" Wrenches
(2) 1/2" Wrench
(1) Pliers
(1) Hammer
STEP 1: (SEE FIGURE 1)
Install a 5/16-18 x 2-3/4" hex bolt (17) and a 5/16" •
jam nut (25) in each bag arm channel.
STEP 2: (SEE FIGURE 2)
Slide the bag arm channels (4) into the sweeper •
housingasshowningure2.Securethemtothe
sweeper housing with a 5/16-18 x 2-1/2" hex bolt (15)
and 5/16" nylock nut (21). Tighten bolt until snug. Do
not overtighten.
STEP 3: (SEE FIGURE 3)
Secure each bag arm channel to the side of the •
sweeper housing with a plastic wing nut (31) installed
onto the bolt assembled in step 1.
Insert a pivot rod retainer (30) down into the end of •
each bag arm channel.
Install a compression spring (32) into the bottom of •
each of the pivot rod retainers to secure them to the
bag arm channels.
FIGURE 4
8
15
14
21
8
STEP 4: (SEE FIGURE 4)
Attach the drawbar (14) to the sweeper by fastening •
a drawbar bracket (8) above and below the drawbar
using three 5/16" x 2-1/2" hex bolts (15) and 5/16"
nylock nuts (21).
FIGURE 1
17
4
25
FIGURE 2
15
4
21
FIGURE 3
31
30
32