Filter
Top Products
=n = = =
ASSEMBLY
i i i
CHECK LIST
= Check all fasteners. Make sure they are tight and there
are no loose parts.
• Make sure the blower tube is firmly seated in the blower
outlet•
• If you are using the unitas a blower, make sure the inlet
cover is latched_
= In blower mode. check to insure the nozzle issecurely
seated inthe blower tube.
• If you are using your unit as a vacuum, make sure the
vacuum tubes are firmly connected, and positioned as
shown inthe assembly illustrations.
• Make sure the collection bag is correctly adjusted with
the shoulder strap on your right shoulder,
• Make sure your extension cord is marked with a suffix of
"W-A". ("W" in Canada).
-9-