Filter
Top Products
CUSTOMER RESPONSIBILITIES
= = H=
MAINTENANCE SCHEDULE
Fill in dates as you complete regular service.
Check for damaged or worn parts.
C_eanunit and labels.
Check for loose fasteners and parts.
Clean collection bag.
Before Use
,,,,,,,,,,,,,,,,
After Use
Yearly
Service Dates
GENERAL RECOMMENDATIONS
The warranty on this unit does not cover items that have
been subjected to operator abuse or negligence. To receive
full value from the warranty, the operator must maintain unit
as instructed in this manual.
Some adjustments will need to be made periodically to
properly maintain your unit.
All adjustments in the "Service and Adjustments" section of
this manual should be checked at lease once each season.
Follow the maintenance schedule in this manual.
&
WARNING
THIS BLOWER IS PROVIDED WITH
DOUBLE INSULATION. USE ONLY IDEN-
TICAL REPLACEMENT PARTS. ALL
ELECTRICAL REPAIRS TO THE UNIT, IN-
CLUDING ON/OFF SWITCH, MOTOR,
ETC., MUST BE DIAGNOSED AND RE-
PAIRED BY YOUR SEARS SERVICE
CENTER. FAILURE TO DO SO CAN
CAUSE THE DOUBLE INSULATION
CONSTRUCTION TO BECOME INEFFEC-
TIVE AND RESULT IN SERIOUS INJURY
TO THE OPERATOR.
YEARLY
CLEAN THE COLLECTION BAG
The collectionbag mustbe properlyemptiedand maintained
to avoid deterioration and obstruction of air flow which will
reduce the performance of your unit.
• Remove the bag and empty after each use. DO NOT
store the bag without emptying it of all leaves, grass, or
debris.
• Wash the bag once a year by turning inside out and
washing with a water hose. Be sure to let bag dry com-
pletely before re-using the unit.
BEFORE EACH USE
CHECK FOR DAMAGED/WORN PARTS
• Replace brower nozzles that are bent, warped, cracked,
or damaged in any way.
• Replace vacuum tubes that are bent, warped, cracked,
or damaged in any way.
• Inspect impellerfor cracks.
CLEAN UNIT AND LABELS
• Clean the unit using a damp cloth with a mild detergent.
• Wipe off the unit with a clean dry cloth.
• Keep air vents and air intake free from debris al alltimes.
AFTER EACH USE
CHECK FOR LOOSE FASTENERS/PARTS
• Inspect blower tube. Make sure tube is secure to the
blower outlet.
- 13 -